KORE-Insulation-Solutions.png

KORE ENERGY EFFICIENCY SOLUTIONS

At KORE we're serious about saving energy. Across the EU, buildings are responsible for 40 percent of all energy usage, and 36 percent of all carbon dioxide emissions. While we're making progress, we still have a long ways to go. 

KORE products can and have been used successfully in low energy buildings. Our products can be found in certified EnerPHit and Passive Houses across Ireland, the UK and the EU. New build or retrofit, KORE EPS is durable, sustainable and manufactured to last. 

HIGH PERFORMANCE WALL INSULATION

Whether you're insulating a cavity wall, hollow block wall, timber frame or solid block wall, we have you covered. KORE EPS can be used in a variety of applications:

Blue_Box_1.jpg

Use KORE Fill Bonded Bead for cavity wall insulation applications. Available in both original and a lower thermal conductivity bead.

Blue_Box_2.jpg

Use KORE External for solid block walls and for walls built without a cavity. 

Blue_Box_3.jpg

Use KORE Key for partial fill cavity wall and internal wall applications. The KORE Key system is designed to prevent thermal looping

HIGH PERFORMANCE FLOOR INSULATION

Stop heat from escaping through the floor. KORE EPS can be used for floor insulation applications, or as a fully engineered passive foundation system:

Blue_Box_1.jpg

Use KORE Floor to insulate below a concrete floor slab, below a cement based screed on a concrete slab with hardcore base, above a suspended concrete floor or between the joists of a suspended timber floor.

Blue_Box_2.jpg

Use the KORE Passive Slab to fully insulate the foundation of a building. The Passive Slab eliminates the wall-to-floor cold bridge for the same cost as a traditional strip or raft foundation.

HIGH PERFORMANCE ROOF INSULATION

Blue_Box_1.jpg

Use KORE Lock for both cold and warm pitched roof applications. KORE Lock is combined with KORE Warmsark for warm pitched roofs and KORE Thermal Boards for cold pitched roof.

Blue_Box_2.jpg

Use the KORE Loft Insulated Attic Flooring System to insulate the attic without having to compromise storage space.

Blue_Box_3.jpg

Use the KORE Passive Roof System in all building types to achieve high levels of air tightness and thermal properties.

VENTILATION & DRAUGHT PROOFING SOLUTIONS FOR ROOFS, ATTICS & WALLS

Blue_Box_1.jpg

Ventilate the roof and attic of your home with KORE's range of tile vents, slate vents and soffit vents. Available in a variety of colours and airflow requirements. 

Blue_Box_2.jpg

Ventilate insulated walls with KORE's hit & miss vents, louvre vents and proprietary ventilators available in a variety of finishes to match the interior and exterior of the home.

Blue_Box_3.jpg

Seal up air leaks with KORE Draught Proofing Solutions, including strips and brushes in a variety of colours and sizes for use around windows, doors and letter boxes.

Blue_Box_4.jpg

Insulate hot and cold water tanks with KORE Hot & Cold Water Lagging Jackets. Compliment tank lagging with KORE Pipe Insulation for interior and exterior use.

ENHANCE THE STRENGTH OF CONCRETE WITH KORE VOID FORMERS

Blue_Box_1.jpg

Minimise the weight and increase the strength of concrete with KORE Void Formers. The ideal solution for pre-cast concrete products, concrete is poured around pre-moulded EPS shapes cut specifically to size.

 

 

airpop_logo_white_light_blue_2_srgb.jpg