KORE-Ventilation-Logo.png

KORE VENTILATION SOLUTIONS

KORE offers a wide variety of ventilation solutions for nearly every application - from new build to retrofit we have you covered. Our current range includes tile and slate ventilators, hit & miss ventilators, louvre ventilators, soffit ventilators and proprietary vents. Speak with our technical team or request a free, no obligation quotation directly on our website.

Roof Ventilation

K20 Tile Ventilator

K20_Tile_Vent.jpg

KORE's K20 Tile Vent is suitable for most interlocking and plain roof tile roofs with a pitch over 17.5 degrees. The K20 can also be used for heat recovery systems with an optional 150mm adapter. The K20 Tile Ventilator is suitable for both high and low level ventilation requirements.

Free Ventilation Area: 20,000mm²
Colours: Slate grey and brown

PDF_small.pngDownload the K20 Tile Vent Technical Data Sheet

K15 Tile Ventilator

K15_Tile_Vent.jpg

The K15 Tile Vent is suitable for most interlocking and plain tile roofs with a pitch over 17.5 degrees. The K15 can also be used for soil and mechanical extract ventilation and is suitable for both high and low level ventilation.

Free Ventilation Area: 15,000mm²
Colours: Grey and brown

PDF_small.pngDownload the K15 Tile Vent Technical Data Sheet

K10 Slate Ventilator

K10_Vent.jpg

The K10 Slate Vent is designed for slate roof ventilation for new builds or retrofit applications. The K10 can be used for roof pitches between 20 and 60 degrees at high or low level where eaves or ridge vents are not suitable.

Free Ventilation Area: 10,000mm²

PDF_small.pngDownload the K10 Slate Vent Technical Data Sheet

K5 Slate Ventilator

K5_Slate_Vent.jpg

The K5 Slate Vent is designed for slate roof ventilation for new builds or retrofit applications. The K5 can be used for roof pitches between 20 and 60 degrees. Not recommended for high-level use due to possible stagnant air pockets developing between units.

Free Ventilation Area: 20,000mm²

PDF_small.pngDownload the K5 Slate Vent Technical Data Sheet

K7000 Soffit Ventilators

Soffit_Vent.jpg

KORE's K7000 Soffit Ventilators are designed primarily for retrofit applications for pitched roofs of 15 degrees and above. Available in white, black or brown colours, each vent provides a free ventilation area of 2,500mm².

Free Ventilation Area: 10,000mm² when placed at 250mm centres (2,500mm² each)

PDF_small.pngDownload the K7000 Soffit Vent Technical Data Sheet

Hit & Miss Ventilators

KORE 9" x 6" Hit & Miss Ventilator

9x6_Hit_and_Miss.jpg

KORE's 9" x 6" Hit & Miss Vents are designed to provide background ventilation. Required airflow can be manually adjusted from the vent cover. Hit & Miss Vents are not designed or suitable for combustion appliances. The integral flyscreen is designed to reduce light, draughts and insects.

Free Ventilation Area: 4,400mm²

PDF_small.pngDownload the KORE 9" x 6" Hit & Miss Vent Technical Data Sheet

KORE 9" x 9" Hit & Miss Ventilator

9x9_Hit_and_Miss_White.jpg

KORE's 9" x 9" Hit & Miss Vents are designed to provide background ventilation. Required airflow can be manually adjusted from the vent cover. Hit & Miss Vents are not designed or suitable for combustion appliances. The integral flyscreen is designed to reduce light, draughts and insects.

Free Ventilation Area: 13,000mm²

PDF_small.pngDownload the KORE 9" x 9" Hit & Miss Vent Technical Data Sheet

Louvre Ventilators

KORE Round Louvre Vent 6.5"

Round_Louvre_Vent_Front.jpg

KORE's 6.5" Round Louvre Vent is designed to fit 4", 5" and 6" tubes. The ventilator can be used with combustion appliances with the included flyscreen removed. Suitable for internal or external use. Available in white and brown colours.

Free Ventilation Area: 11,500mm² without flyscreen on 6" tube

PDF_small.pngDownload the 6.5" Round Louvre Vent Technical Data Sheet

KORE 9" x 9" Louvre Vent

9x9_Louvre.jpg

KORE's 9" x 9" Louvre Vent is designed to provide room background or cupboard ventilation. Open louvres allow for high airflow. This vent is suitable for both internal and external use. The 9" x 9" Louvre Vent is not designed or suitable for combustion appliances. Available with our without flyscreen.

Free Ventilation Area: 26,500mm² (no flyscreen), 20,000mm² (flyscreen)

PDF_small.pngDownload the 9" x 9" Louvre Vent without Flyscreen Technical Data Sheet

PDF_small.pngDownload the 9" x 9" Louvre Vent with Flyscreen Technical Data Sheet

Proprietary Ventilators

KORE Drill Proprietary Vent

KORE_Drill.jpg

The KORE Drill Proprietary Vent is designed to provide ventilation for combustion appliances. The KORE Drill allows air to be pulled through by the appliance while in operation. The KORE Drill can be used with or without the included baffle.

Free Ventilation Area: 10,000mm², 7,000mm² with baffle

PDF_small.pngDownload the KORE Drill Proprietary Vent Technical Data Sheet

 

 

Request a Quote