WALL INSULATION SOLUTIONS
KORE offers a range of wall insulation solutions made from high quality expanded polystyrene for both the new build and retrofit markets. You can find our library of technical documents on the KORE Resource Centre.
ORIGINAL BONDED BEAD CAVITY WALL INSULATION
KORE Fill is a bonded bead cavity wall insulation system for application in new and existing buildings up to 12 metres in height. KORE Fill is approved for use in masonry cavity walls for both full fill and partial fill situations, when a residual cavity wall width of 40mm or greater exists.
KORE Fill Original has a thermal conductivity of 0.035W/mK. KORE's specialised drilling pattern ensures a complete fill every time without diminishing the original function of the cavity.
Bonded bead cavity wall insulation can only be installed by one of our KORE Approved insulation contractors.
DIAMOND BONDED BEAD CAVITY WALL INSULATION
KORE Fil Diamond is a bonded bead cavity wall insulation system that offers a lower thermal conductivity of 0.033W/mK when compared to KORE Fill Orginal. KORE Fill Diamond shares many of the same key benefits as KORE Fill Original.
KORE Fill Diamond Cavity Wall Insulation differs slightly in size, as the bead itself is oval shaped. The installation of this lower thermal conductivity bead requires a cavity width of at least 50mm, compared to the 40mm required for KORE Fill Original.
Like the original bead, KORE Fill Diamond must be installed by one of our KORE Approved Insulation Contractors Approved Insulation Contractors.
EXTERNAL WALL INSULATION
KORE External Wall Insulation, together with a composite system, is fixed to the external face of external wall constructions. The product is designed for application on cavity walls, solid walls, hollow block walls and timber frame walls. KORE External Insulation is suitable for both new builds and retrofits.
KORE External Insulation is made from high quality expanded polystyrene. The product consists of rigid boards cut from moulded blocks of EPS. The blocks are aged for four to six weeks to ensure the product is delivered to site to the exacting tolerances required for external insulation products.
KORE External products are available in two grades of material, silver and white, and a range of thicknesses.
PARTIAL FILL CAVITY WALL & INTERNAL DRY LINING SYSTEM
The KORE Key Insulation System is designed for application in masonry cavity walls. When used with KORE Thermal Board the requirements of building regulations with a 150mm cavity will be satisfied.
The KORE Key System combines partial fill cavity wall insulation and internal insulation to quickly achieve high comfort levels for occupants.
The KORE Key Partial Fill Cavity Wall Insulation System is unique as it's secured to the inner block leaf of the cavity wall by wall ties and mortar lock key. The system is designed to prevent thermal looping while the wall is heating and cooling. Each board is tongue and grooved to form a continuous layer of insulation.