KORE EPS Void Formers
KORE’s EPS Void Formers are used extensively throughout the construction industry for major works such as motorways, underpasses, shopping centres, foundations and embankments. KORE Void Formers are suitable for domestic and commercial applications.
KORE EPS can be used as both void formers and void fillers. Void formers decrease the volume of concrete, reducing weight while increasing the strength of concrete. Void fillers are designed to fill a void with Expanded Polystyrene and are left in-situ.
KORE EPS Void Formers and Void Fillers are available in a range of compressive strengths to suit the needs of the project.
PERFECT FOR CIVIL ENGINEERING
KORE’s EPS Void Formers are perfect for civil engineering applications, such as motorways, underpasses, foundations and embankments.
MINIMISE THE WEIGHT OF CONCRETE
KORE Void Formers reduce the weight and enhance the strength of concrete and are available in a range of compressive strengths to suit the needs of your project.
EASY TO WORK WITH AND INSTALL
KORE Void Formers are manufactured to your exact project requirements and are easy to work with and install. KORE’s EPS Void Formers can be cut on-site without the need for specialised equipment.
RESISTANT TO WATER AND MOISTURE
Like all EPS products, KORE Void Formers and water and moisture resistant and will not absorb or retain moisture. KORE Void Formers are suitable for nearly all ground conditions.
WHY CHOOSE KORE VOid formers?
KORE Void Formers are the ideal solutions for applications that require the reduced weight of concrete when left in-situ. KORE Void Formers can also be used temporarily as part of a formwork system.
KORE Void Formers are made from Expanded Polystyrene – the same high performance material used for our extensive range of insulation solutions. Made from 98% air, KORE EPS is lightweight, versatile, water and moisture resistant, rot-proof and will not degrade over time.
KORE Void Formers are manufactured to the specifications required from each project and profiled before delivery to site. KORE Void Formers can also be cut on site without the need for any specialised equipment. KORE EPS can be used for both void former and void fill applications.
BESPOKE EPS VOID FORMERS
Applications for KORE Void Formers
Image: Luas Line Dublin
KORE Void Former Technical Details
KORE Void Formers Manufactured with Expanded Polystyrene
|Compressive Strength at 10% strain (kPa)||70||100||150||200||300|
KORE Void Formers and Void Fillers comply with IS EN13163 & IS EN14933
KORE Void Formers On-Site
You can find more information about KORE Void Formers through our case studies.